My Account
Checkout
Cart:
Valspar Medallion Exterior Paint
Available in store
- 100% acrylic durability
- Mildew resistant finish
- Paint and primer in one product
- Washable, stain resistant
- Soap and water clean-up
- Low odor, low VOC
Features
This tough house paint keeps your home safe from the weather a 100% acrylic coating. Paint dries quickly and cleans up easily with soap and water. Gives mildew resistant coating.
Where To Use
Use paint on all exterior surfaces, including wood siding and trim, hardboard siding, primed metal, shakes, shingles, brick, cement, cinder block, stucco, concrete, stone, asbestos, galvanized steel, aluminum and vinyl siding. DO NOT USE on glazed brick, glazed aluminum, glazed masonry, floors or steps.
Coverage
Use paint on all exterior surfaces, including wood siding and trim, hardboard siding, primed metal, shakes, shingles, brick, cement, cinder block, stucco, concrete, stone, asbestos, galvanized steel, aluminum and vinyl siding. DO NOT USE on glazed brick, glazed aluminum, glazed masonry, floors or steps.
Coverage
300-400 Sq. Ft. per gallon of paint depending on porosity. With some paint colors or drastic color changes, more than one coat may be necessary to achieve a uniform finish. DRY TIME: Dries to touch in 1 hour, 4 hours before recoating, longer in high humidity or cool temperatures.
Preparing Your Surfaces
Before you paint clean and dry the surface thoroughly, removing all dirt, dust, rust and grease. On bare wood, coat knots and sappy areas with stain block primer/sealer. Then prime entire surface with exterior oil or latex primer. On previously painted surfaces, scrape, sand, then prime. Wire brush badly chalking areas. Dull glossy surfaces with gloss remover or sandpaper. Countersink nails and fill with putty. Caulk all cracks and joints.
Before you paint clean and dry the surface thoroughly, removing all dirt, dust, rust and grease. On bare wood, coat knots and sappy areas with stain block primer/sealer. Then prime entire surface with exterior oil or latex primer. On previously painted surfaces, scrape, sand, then prime. Wire brush badly chalking areas. Dull glossy surfaces with gloss remover or sandpaper. Countersink nails and fill with putty. Caulk all cracks and joints.
Reviews
There are no reviews yet.